Curtain Track End Stop
Curtain Track End Stops
Curtain track end stops prevent curtain track carriers from falling off the curtain track. Curtain Track End stops should be placed at the end of all curtain tracking ends. Use a Snap-Out Fitting in the End Stop to easily replace or install carriers in the curtain tracking.
End Stop Specifications
Natural Aluminum Finish or White Powder Coat.
End Stop Function
The end stops are placed on the end on the track run on the top side of the track. Its purpose is to prevent the carrier rollers from exiting the end of the track. Our end stops are designed to be used with the snap out fittings that we also sell. To use the end stop with a snap out fitting you "snap" the snap out fitting into the end stop then install the end stop as normal. The snap out fitting has a bump on each side that is made to snap into 2 small holes in the end stop. The snap out fittings purpose is you can remove the snap out and replace rollers that might have been damaged. This is a lot easier than disassembling the track to replace broken rollers.